2 x 1ml Doppel Geschmack Einweg Vape Gerät für CBD THC HHC

Double Flavor Disposable Vape Device For CBD THC HHC Instructions and precautions:
1. Oil injection steps
Insert a blunt needle into the space between the inner walls of the oil cup or into the silicone oil injection hole. Do not inject directly from the atomizer airway, otherwise the oil guide cotton will not absorb in time, causing oil leakage.
2. Precautions
(1) During the oil filling process, this electronic cigarette product needs to be kept vertical, and the oil cup should be filled with oil through the needle. Do not fill it too full (preferably 95% or 98% of the actual oil filling amount, that is, the left and right oil cups should be filled with 0.95ml-0.98ml of e-liquid), and the oil filling speed should not be too fast. It is best to inject at a constant speed to prevent overflow when it is too full.
(2) After refueling, fasten the cigarette butt as soon as possible (it is recommended to complete this operation within 30 seconds to prevent excessive air from entering the oil storage compartment and causing errors).
(3) When using mechanical equipment to press the mouthpiece, it is necessary to ensure that the mouthpiece is pressed in place, and the force should not be too strong during the operation.
3. Regarding batteries
Output method: Turn the toggle switch to the left or right, inhale into the microphone or press and hold the button. Smoking begins, and the white light will gradually turn on. When the air pressure triggers the gear, the output voltage drives the heating wire to work, producing smoke. If it does not inhale, the white light will gradually turn off. Press the button twice within two seconds to activate the preheating function, with a preheating time of 15 seconds.
Over suction protection: If the suction time exceeds 10 seconds, the white light will flash twice, and the atomizer will stop outputting.
Short circuit protection: When a short circuit is detected in the atomizer before and during suction, the white light flashes 3 times and the output stops.
Static current ≤ 5uA.
Low voltage protection: If the battery voltage is below 3.2 ± 0.1V and the battery voltage is too low before or during suction, the white light will flash continuously for 10 times and the output will be cut off.